WELCOME TO OUR BLOG

We're sharing knowledge in the areas which fascinate us the most
click

Using 0701014 and AZ9925520268 to Identify a Truck Fastener

By truckpartsoem September 15th, 2026 60 views
Catalog

Introduction: Product number 0701014 and P/N AZ9925520268 create a useful starting record for identifying a rear-mounted horse bolt nut in heavy truck documentation.

A number-based record helps technical researchers connect the same part across catalogs, repair notes, inventory files, and supplier communication. It also prevents a common mistake: treating a familiar number as if it were a complete specification. The available listing identifies the component as rear-mounted horse bolt nuts in the Suspension & Brake System category, with product No. 0701014 and P/N AZ9925520268. That is enough to organize the part and begin research, while dimensions, thread data, material, performance grade, paired components, and vehicle fitment require separate technical records.

What 0701014 and AZ9925520268 Tell You About the Part

The two identifiers point to one catalog entry for a specific fastener product. Product No. 0701014 is the shorter catalog identifier, while P/N AZ9925520268 is the part-number reference used for the same listed item. In a working record, both should be stored together rather than choosing one and discarding the other. The product name adds the physical category: rear-mounted horse bolt nuts. The catalog category adds system context by placing the item under Suspension & Brake System. That combination gives a researcher a practical first description: a nut-type fastener associated with rear-mounted horse bolt applications in heavy truck suspension and brake assemblies. It helps distinguish the item from a complete suspension assembly, a brake component, or the horse bolt itself. It also gives a useful phrase for searching repair records and supplier documents. A record might begin with the product name, product No. , P/N, category, source date, and the vehicle or assembly reference where the number was found. Catalog context matters because the same kind of fastener may appear in different internal systems under different descriptions. A repair shop may record a short product number, an importer may use a P/N, and a parts catalog may organize the item by vehicle system. Matching 0701014 with AZ9925520268 across those records can reveal that several entries refer to the same catalog item. The match becomes stronger when the wording, category, source, and assembly reference also agree. The identifiers still describe identity more effectively than physical detail. They do not state the nut's outside dimensions, thickness, thread diameter, pitch, material grade, surface treatment, packaging unit, or matching horse bolt. They also do not name a precise truck model, production year, axle configuration, or chassis variant. Those fields belong in separate sections of the technical record.

Why a Part Number Is Only the Start of Technical Identification

A part number is valuable because it gives a stable handle for organizing information. It is not a substitute for the engineering data that determines whether a fastener belongs in a particular connection. A nut can look similar to another nut while differing in thread form, pitch, diameter, seating geometry, material, coating, or intended load. In a heavy truck assembly, a small mismatch can affect installation, clamping behavior, service replacement, and the relationship between the fastener and the connected parts.

1. Product Numbers Organize Catalog Records Without Replacing Specifications

A useful identification record separates what the number names from what the component requires. For 0701014 and AZ9925520268, the first layer is straightforward: the listed product is rear-mounted horse bolt nuts, and its category is Suspension & Brake System. The next layer should capture the physical interface, including thread size and pitch, nut height, outside dimensions, contact surface, and the dimensions of the corresponding horse bolt. The final layer connects the fastener to a vehicle, assembly drawing, or service instruction. This layered approach helps when documents use different levels of detail. An inventory file may contain only AZ9925520268. A repair record may contain 0701014 and a truck identification number. A drawing may show dimensions but use an internal drawing code. Keeping the identifiers together with these related records allows the researcher to build a traceable chain instead of guessing from a photograph or a similar-looking replacement. Thread information deserves particular attention. The thread determines whether the nut can engage the mating bolt and how the connection transfers tightening force. Diameter and pitch affect the thread engagement and stress area, while the seating surface affects how force reaches the connected assembly. RoyMech's discussion of thread stress areas illustrates why thread geometry is an engineering factor, not a minor catalog detail. A product number can lead a researcher to the correct record, but the thread specification determines whether the physical connection is suitable. The same principle applies to material and surface treatment. The available product description mentions precision manufacturing, dimensional consistency, mechanical strength, and corrosion resistance as product characteristics. The listed information does not name a material grade, strength class, coating, or treatment process. Those details should be added from a drawing, material certificate, inspection record, or other controlled technical document when they are required for the identification.

2. Performance Grades Require Separate Material and Test Information

Performance language needs its own evidence trail. “Mechanical strength” describes an important fastener concern, but it does not identify a particular strength class. Metric fastener references commonly separate proof load, yield-related behavior, and ultimate tensile strength. These properties answer different engineering questions, so a part number should never be used to infer a grade or load value. ASTM F606/F606M provides defined test methods for mechanical properties of fasteners, including tensile and hardness-related testing. That distinction is useful when organizing records: a catalog number identifies the item, while a test method and test result describe how its performance was evaluated. NASA's Fastener Design Manual likewise treats fastener selection as a relationship among geometry, material, preload, applied load, fatigue, and joint design. A number alone carries none of that complete design information. For documentation researchers, this means a quality record should keep identification data and performance data in related but separate fields. The first field may read “0701014 / AZ9925520268, rear-mounted horse bolt nuts. ” Additional fields can remain open for material, strength grade, coating, test method, test result, and revision-controlled drawing reference. This arrangement keeps the record useful immediately and prevents later readers from mistaking an unfilled field for an assumed specification.

How to Connect the Identifier With Vehicle and Assembly Records

The next step is to connect the number to the actual vehicle or assembly where the fastener is used. The listing mentions Sinotruk, Shacman, and FAW platforms, which gives researchers useful platform names for organizing follow-up records. These names are entry points for vehicle research, not a complete model range. A vehicle record should add the exact model, production year, axle or suspension configuration, chassis number where available, and the relevant parts-catalog reference. Assembly relationships are just as important as vehicle names. Rear-mounted horse bolt nuts are associated with a horse bolt or similar connected component, so the record should identify the paired bolt and the part or bracket being secured. A matching entry in a repair manual, assembly drawing, removed-part label, or approved replacement record can connect the fastener to a particular location. This is especially useful when one truck platform uses several suspension layouts or when similar nuts appear in different positions. A practical research example begins with a repair inquiry containing “0701014. ” The researcher searches the internal catalog and finds AZ9925520268 attached to rear-mounted horse bolt nuts. The category points toward suspension and brake records. The researcher then compares the number with the vehicle model, chassis configuration, assembly drawing, and the removed fastener. If the matching records agree, the initial identification becomes more useful and more specific. The technical file can then request the missing dimensions, thread, material, grade, coating, torque instruction, and test documentation. This process also helps separate identification from compatibility. Identification answers, “Which catalog item does this number represent? ” Compatibility answers, “Will this item work in this exact vehicle and connection? ” The second question depends on the complete assembly relationship. It may require model-specific parts information, dimensional comparison, thread matching, material and grade requirements, installation instructions, and confirmation of the paired horse bolt. For fleet maintenance and parts distribution, the distinction improves repeatability. A stock record can use both identifiers to locate the item quickly, while a vehicle application record controls which truck configurations may receive it. For a truck parts supplier, suspension parts suppliers, or truck chassis manufacturers, this separation also makes technical inquiries clearer. The request can identify the catalog item first and then ask for the documents needed to establish the intended application.

Conclusion

Product No. 0701014 and P/N AZ9925520268 provide a clear initial entry for rear-mounted horse bolt nuts in the Suspension & Brake System category. They help connect catalog, repair, inventory, and supplier records, but the technical file still needs dimensions, thread data, material, performance grade, paired-component information, and vehicle application records. Using the numbers as the starting point keeps identification organized while leaving engineering decisions to the specifications and assembly documents that support them.

FAQ

Q:What does product number 0701014 identify?

A:Product No. 0701014 identifies a listed rear-mounted horse bolt nut product in the Suspension & Brake System category. It is associated with heavy truck suspension, brake, and chassis assembly records. The same entry gives P/N AZ9925520268, making the two identifiers useful together when matching catalogs, repair records, inventory files, or parts inquiries.

Q:What is the difference between 0701014 and P/N AZ9925520268?

A:Both numbers identify the same listed fastener entry, but they serve different record labels. 0701014 is presented as the product number, while AZ9925520268 is presented as the P/N, or part-number reference. A technical record should retain both because different catalogs, repair documents, or supplier communications may use one identifier instead of the other.

Q:Can 0701014 and AZ9925520268 confirm the correct fastener for a specific truck model?

A:They can identify the catalog entry used for the initial search, but a specific truck application also requires model, year, chassis configuration, assembly position, dimensions, thread data, paired horse bolt information, and applicable technical documents. The listed platform names provide useful research direction, while the final application record should come from model-specific parts or assembly information.

Sources / References

F606/F606M Standard Test Methods for Determining the Mechanical Properties of Fasteners

Metric Bolt Strength: Minimum, Ultimate Tensile and Proof Loads

Fastener Design Manual

Related Examples

Rear-mounted horse bolt nuts

Previous
How Do Threaded Fasteners and Welded Joints Differ in Heavy Truck Assemblies?
Read More
Next
Truck Fastener Rust and the Limits of Visual Inspection
Read More